Simply the best
Cart 0
S7.20 - Dashboard repair by OBDII for Audi A3, TT, R8 new 2010+

Atomis

S7.20 - Dashboard repair by OBDII for Audi A3, TT, R8 new 2010+

$115.00

License only available for original Atomis CarProg tool. Activation will not work on clone devices.
To be able to activate licences on your clone device you need to legalize it. Legalization is available to get in our store. Please take a look HERE.

If you buy a license for not original CarProg tool device, we cannot provide any refund.

CarProg software for Audi A3, TT, R8 new 2010+ dashboard repairing by OBDII: read/write EEPROM, repair odometer, read/write immo data for key programming or dashboard cloning.
  Dead A3/TT dashboards REPEIR by OBDII !
From 2009 Audi changed instrument clusters based on Micronas processor software. If you try to repair these dashboards like older tacho (for ex. with Digiprog or Tacho universal like A3 2006+ DIAG) dashboard can be damaged. After repairing instrument cluster it will be completely  dead - also car engine will not start (immobiliser is in dashboard). Now with CarProg you can repair it by OBDII.

S7.20 CarProg software functions:

  • A3 2010+ dashboard repairing by OBDII: read/write EEPROM, repair odometer, read/write immo data for key programming or dashboard cloning;
  • TT 2010+ dashboard repairing by OBDII: read/write EEPROM, repair odometer, read/write immo data for key programming or dashboard cloning;
  • R8 2010+ dashboard repairing by OBDII: read/write EEPROM, repair odometer, read/write immo data for key programming or dashboard cloning;

How does this software work:


  • If you need just repair mileage in the car by OBDII: connect CarProg with A1 adapter to car OBDII. Load A3/TT 2009-2011 OBDII software. Switch ignition ON.  Push "Prepare Unlock Dump" - odometer will be reseted to 0km. Now push "Change KM", CarProg will show 0km, enter new odometer value and push "OK". Odometer is repaired.
  • If you need add new key (if one working key already exists): connect CarProg with A1 adapter to car OBDII. Load A3/TT 2009-2011 OBDII software. Switch ignition ON.  Note original odometer value. Push "Prepare Unlock Dump". Odometer will reset to 0km. Swich ignition OFF.
1. Remove dash from car and read  EEPROM 24C32 manualy (using CarProg EEPROM software);
2. Save this EEPROM dump;
3. Put dash back to car and connect via OBDII again;
4. Press button "Load unlock dump" and load saved eeprom file.
5. Now you can read IMMO file with button "Read immo"
6. Save this immo file;
7. Load VAG KEY software;
8. Open immo file, put transponder to the Carprog A3 antena and press write button;
9. Choose new key possition and save new immo file;
10. Load A3/TT 2009-2011 OBDII software;
11. Press button "Load unlock dump" and load saved EEPROM file again. Load new immo file with "Open" button.
12. Write immo file with "Write immo" button. Write old odometer with "Change KM" button


  • If you need program new key - all keys are lost (IMMO IS ACTIVE):

1. Remove dash from car and read  eeprom 24C32 manualy (using CarProg EEPROM software);
2. Save this EEPROM dump to have backup;
3. Fill EEPROM dump range 0x812 - 0x9BF in hex editor with FF FF ... ;
4. Write this damaged dump to EEPROM;
5. Put dash back to car and connect via OBDII again; Cluster display will show "Error";
6. Push "Prepare Unlock Dump"; Odometer will reset to 0km;
7. Remove dash from car and read  EEPROM again 24C32 manualy (using CarProg EEPROM software)
8. Save this eeprom dump (THIS ONE WILL BE UNLOCK DUMP FILE);
9. Put dash back to car and connect via DIAG now( Load A3/TT 2009-2011 OBDII software);
10. Press button "Load unlock dump" and load saved UNLOCK DUMP file;
11. Load your saved backup (original eeprom) and press write;
12. Now you can read IMMO file with button "Read immo";
13. Save this immo file;
14. Load VAG KEY software;
15. Open immo file, put transponder to the Carprog A3 antena and press write button;
16. Choose new key possition and save new immo file;
17. Load A3/TT 2009-2011 OBDII software;
18. Press button "Load unlock dump" and load UNLOCK DUMP file again. Load new immo file with "Open" button.
19. Write immo file with "Write immo" button. Write old odometer with "Change KM" button

 

NOTE! This software is included in CARPROG FULL or CARPROG DASHBOARD packages.

Electronic delivery only!


Share this Product


More from this collection

x