TMPro2
TMPro2 - Motorcycle full package
Motorcycle full package - contains all software modules for key making in motorcycles and scooters.
This package contains:
- Software module 25 – Seat, Peugeot, Piaggio bikes immobox Marelli
Memory device is Motorola MCU MC68HC05E6 SO28 package.
Expected file size is 160 bytes.
Use T5 transponder.
Written transponder is ready programmed to start the vehicle.
Click here to see opened Piaggio/Peugeot bikes immobox.
Vehicles equipped with this unit:
Seat: Marbella
Fiat: Fiorino
Peugeot: Alise, Eliseo, Speedfight
Piaggio: Beverly, Liberty, Vespa, X8
Gilera: GP800
- Software module 33 – Peugeot bike engine ECU Marelli
Memory device is Motorola MCU MC68HC05B16 QFP64 package.
Expected file size is 256 bytes.
Use T5 transponder.
Written transponder is ready programmed to start bike.
Click here to see opened Peugeot bike engine ECU Marelli.
Vehicles equipped with this unit:
Peugeot: Alise, Eliseo, Speedfight
Piaggio: Beverly, Liberty, Vespa, X8
- Software module 58 – Ducati bikes dashboard Marelli
Memory device is serial eeprom 24c02 or 24c16 SMD8 package.
Expected file size is 256 or 2048 bytes.
Use T5 transponder.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Ducati: 600, 620, 749, 800, 900, 999, 1000
- Software module 66 – Yamaha bikes immobox Moric
Memory device is serial eeprom Seiko S29190 SMD8 package.
Eeprom can be located in 2 different position. Click here and here to see where to dig for to reach eeprom.
Expected file size is 128 bytes.
Use JMA TPX2 – Errebi TX2 or CN2/CN5 or YS-01 transponder.
Written transponder is ready programmed to start bike.
Note: latest Yamaha immobox Moric DO NOT HAVE serial eeprom, so please check your immobox before purchasing this software. If there is no serial eeprom, but 16 pin chip TMS3705 you need software module 108.
Vehicles equipped with this unit:
Yamaha: BT1100, FJR, FZR, FZ1, FZ6, FZS, XT, XTR, XTX, XVX, YZF
MBK: Skycruiser 125
- Software module 68 – Kawasaki bikes engine ECU Denso, Mitsubishi
Memory device is serial eeprom 93c66/93c86/24c02/24c04/24c64 8 pin SMD package.
Expected file size is 256/512/2048/8192 bytes.
Use JMA TPX2 – Errebi TX2 or CN2/CN5 or YS-01 transponder.
Written transponder is ready programmed to start bike.
Click here to see opened Kawasaki bikes engine ECU Denso
Vehicles equipped with this unit:
Kawasaki: ZX-6R, ZX-10R, ZX-11R, ZX-12R, ZX-14, ZX-1000, Z-750S, Ninja, Z1000, Z800
- Software module 90 – Yamaha scooter ECU Mitsuba
Memory device is serial eeprom 24c04 SMD8 package.
Expected file size is 512 bytes.
Use T5 transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Yamaha:X-MAX 125
- Software module 96 – Honda bikes ECU Keihin, OKI
Memory device is serial eeprom 93c46,93c56,93c66,93c86 SMD8 package or Motorola MCU MPC5602.
For MPC5602 must read and write DATA FLASH area of MPC5602,you can use UPA-USB-S or XPROG-box, download connection diagram.
Because in UPA-USB-S MPC5602 is not listed,you can choose any of MPC560x devices.
For serial eeproms expected file size is 128,256,512 or 2048 bytes.
For MPC5602 expected file size is 65536 bytes.
Use PCF7936 or Silca T14 – JMA TP12 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Honda: CBR 600F, CBR 600RR, CBR 900, CBR 1000, CBR 1100F, Gold 2800, NT650V, SH300, Shadow 750, Silver Wind, Varadero, VT750, VTX1800, X11, Hornet, CB400
- Software module 98 – Aprilia, Moto Guzzi bikes dashboard Digitek
Memory device is serial eeprom 24c01 or 24c16, both SMD8 package.
Expected file size is 128 or 2048 bytes.
Use T5 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Aprilia: SR, RSV, Scarabeo, Atlantic 500
Moto Guzzi:Bellagio, Griso, Norge, Stelvio
- Software module 101 – Ducati bikes dashboard Digitek
Memory device is serial eeprom 24c16 SMD8 package.
Expected file size is 2048 bytes.
Use T5 transponder.
Written transponder is ready programmed to start the bike.
Vehicles equipped with this unit:
Ducati: 848, 948, 1049, 1098, 1198
- Software module 108 – Yamaha bikes immobox Moric type 2
This is new variant of Yamaha immobox, where there is no serial eeprom S29190.
On place, where you must find serial eeprom S29190, you find 16-pin chip TMS3705.
Keys ARE NOT in this chip TMS3705!
Memory device is MORIC MCU 30 pins SSOP package.
MORIC MCU in this immobox IS NOT POSSIBLE TO READ!
Programming of MORIC MCU is thru TMPro, download connection diagrams and instructions
Use Yamaha key or Texas Crypto – Silca 4D-60 – JMA TP06/TP19 transponder.
Written transponder is ready programmed to start bike.
Also you can set immobox to virgin state.
IMPORTANT NOTE:you can program ONE MASTER key and ONE SLAVE key.If you want more slave keys, program a slave key and clone it with software 65.For cloning Yamaha keys with software 65 JMA TPX cloner is not needed.
IMPORTANT NOTE:If you want to program MASTER key, you also MUST MAKE ECU VIRGIN, because programming of MASTER key will delete synchronisation IMMO-ECU.
Vehicles equipped with this unit:
Yamaha: R1, T-MAX, R6, BT1100, FJR, FZR, FZ1, FZ6, FZS, XT, XJR, XTR, XTX, XVX
- Software module 109 – BMW bikes engine ECU Bosch
BMW bikes engine ECU are 2 types – BMSK and BMSX:
For BMSKP ECU – keys are stored in ECU.
Memory device is flash chip ST M58BW0160 – 80 pin PQFP package.
Expected file size is 2097152 bytes.
Reading is thru BDM100 interface or with flash programmer.
For BMSX ECU – to see where keys are stored you must check what is on ignition barrel.
If there is IMMOBOX UNIT – keys are stored in this unit.To make key you need software 191.
If there is KEY READER UNIT – keys are stored in ECU.
Memory device is TRICORE MCU eeprom area.
Expected file size is 65536 bytes.
Use PCF7936 or Silca T14 – JMA TP12 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
BMW: F800, R1200GS, K1600GT
- Software module 128 – Gilera, Piaggio bikes engine ECU EFI
Memory device can be ST72334 QFP64 package or serial eeprom 25c080 SMD8 package.To see where keys are stored, check eeprom.If eeprom is 25c040, keys are in ST72334.If eeprom is 25c080, keys are in eeprom.
Reading of ST72334 MCU is thru TMPro interface, download connection diagram.
Expected file size for ST72334 is 256 bytes, for 95c080 is 1024 bytes.
Use T5 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Gilera: Nexus, Runner
Piaggio: Beverly, Vespa
- Software module 129 – KTM bikes immobox ZADI
Memory device is serial eeprom 24c04 SSOP8 package.
Expected file size is 512 bytes.
Use JMA TPX2 or CN2/CN5 or YS-01 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
KTM: 690, 990, 1190
- Software module 131 – Gilera, Piaggio bikes engine ECU Marelli
Memory device is ST10F269-T3 – 144 pins TQFP package.
You must open throttle body for to reach and read memory device.
Reading of ST10F269-T3 is thru TMPro interface, download connection diagram.
Expected file size is 256/262144/327680 bytes.
Use T5 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Piaggio: Beverly, Vespa, MP3
Gilera: Fuoco
- Software module 168 – Peugeot JetForce bike dashboard Price:100 Euro
Memory device is serial eeprom 95c020 SMD8 package.
Expected file size is 256 bytes.
Use T5 transponder.
Written transponder is ready programmed to start the bike.
Vehicles equipped with this unit:
Peugeot:JetForce
- Software module 171 – MV Agusta bikes dashboard
Memory device is PIC16F690 SSOP20 package.
You can read PIC16F690 with TMPro, download connection diagram
Use JMA TPX2 – Errebi TX2 or CN2/CN5 or YS-01 transponder.
Written transponder is ready programmed to start the bike.
Vehicles equipped with this unit:
MV Agusta:Brutale
- Software module 177 – Ducati bikes with dashboard MAE Electronics
Memory device is PIC18F6585 QFP64 package.
You can read PIC18F6585 with TMPro, download connection diagram.
It is just necessary to cut a small hole for to access programming points, no need to open dash completely.
Use T5 transponder.
Written transponder is ready programmed to start the bike.
Vehicles equipped with this unit:
Ducati:Hypermotard, Streetfighter
- Software module 178 – Ducati bikes handsfree ZADI
Memory device is serial eeprom 24c04, download connection diagram.
Expected file size is 512 bytes
Use Texas Crypto transponder or original Ducati key.
Written transponder is ready programmed to start bike.
If you program original handsfree key, handsfree will also work.
Vehicles equipped with this unit:
Ducati:Diavel, Multistrada
- Software module 182 – Ducati Panigale bike immobox ZADI
Memory device is Motorola 9S12P128.
You can read Motorola 9S12P128 using TMPro, download connection diagram.
Expected file size is 4096 bytes.
Use Texas Crypto 4D-60 or 6D-60 transponder or original Ducati key.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati:Panigale 899, 1099, 1199
- Software module 183 – KTM bikes immobox ZADI type 2
Memory device is Motorola 9S12P128.
You can read Motorola 9S12P128 with TMPro, download connection diagram.
Expected file size is 4096 bytes.
Use JMA TPX2 – Errebi TX2 or CN2/CN5 or YS-01 transponder.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
KTM:Duke, 660, 990, 1190
- Software module 186 – BMW bikes C600, C650 Husqvarna Nuda dashboard
Memory device is serial eeprom 25c160 SMD8 package.
Exected file size is 2048 bytes.
Use TMS37145 80-bit transponder, for example Ford 80-bit
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
BMW:C600, C650
Husqvarna:Nuda, Terra
- Software module 189 – Ducati 2013 Hypermotard bike dashboard MAE
Memory device is serial eeprom 24c02 SMD5 package.
Expected file size is 256 bytes.
Use TMS37145 80-bit transponder, for example Ford 80-bit
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati: Hypermotard 2013
- Software module 191 – BMW bikes 2012 immobox EWS
Memory device is Motorola 9S12G128.
You can read Motorola 9S12G128 with TMPro, download connection diagram.
If Motorola is locked, TMPro will unlock it automatically before to read eeprom area.
Expected file size is 4096 bytes.
Also you can synchronise engine ECU and immobox if they are not matched pair.
Use TMS37145 80-bit transponder, for example Ford 80-bit
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
BMW motorbike: R1200GS, K1300, F800
- Software module 192 – Ducati 821 bike dashboard MTA
Memoy device is serial eeprom 24c16 SMD8 package.
Expected file size is 2048 bytes.
Use JMA TPX2 – Errebi TX2 or CN2/CN5 or YS-01 transponder.
Software shows PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati: Monster 821
- Software module 193 – Ducati 1200 bike dashboard MTA
Memoy device is serial eeprom 24c512 SMD8 package.
Expected file size is 65536 bytes.
Use TMS37145 80-bit transponder, for example Ford 80-bit
Software shows PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati: Monster 1200
- Software module 196 – Kawasaki GTR1400 bike ignition switch Asahi-Denso
Memory device is serial eeprom 93c56 SMD8 package.
Expected file size is 256 bytes.
Use JMA TPX2 – Errebi TX2 or CN2/CN5 or YS-01 transponder.
Written transponder is ready programmed to start bike.
IMPORTANT:This software can programs ONLY SIMPLE TRANSPONDER. Transponder must be placed on ignition switch then bike can start. Original handsfree key can be programmed only by Kawasaki diagnostic tool.
Vehicles equipped with this unit:
Kawasaki: GTR 1400
- Software module 197 – Ducati Scrambler bike dashboard
Memoy device is serial eeprom 24c16 SMD8 package.
Expected file size is 2048 bytes.
Use TMS37145 80-bit transponder or original Ducati key.
Software also shows PIN code.
Written transponder is ready programmed to start bike.
Vehicles equipped with this unit:
Ducati: Scrambler
- Software module 198 – BMW bike handsfree key unit HUF
Memory device is Motorola 9S12XS256.
You can read Motorola 9S12XS256 with TMPro, download connection diagram.
Expected file size is 8192 bytes.
If Motorola is LOCKED, software will unlock it automatically before to read eeprom area.
Also you can synchronise engine ECU and handsfree key unit if they are not matched pair.
Use Texas Crypto 128-bit transponder, for example Toyota H transponder.
Written transponder is ready programmed to start bike.
IMPORTANT NOTE:you must place key or transponder close to antenna under seat for to start bike. Software CANNOT program handsfree function of original used key.
Vehicles equipped with this unit:
BMW: R1200GS
Electronic delivery only!