Simply the best
Cart 0
TMPro2 - Fiat full package

TMPro2

TMPro2 - Fiat full package

$3,979.00 $3,999.00

Fiat full package - contains all software modules for key making in Fiat/ Alfa Romeo/ Lancia Maserati/ Iveco. 

This package contains:

  • Software module 6 – Fiat, Lancia, Alfa Romeo, Maserati CODE2 with BSI Marelli 

Memory device is Motorola MCU, which can be either MC68HC912DG128 or MC9S12DG256, both QFP 112 package.
You can read and write Motorola with TMPro, download connection diagram.
For MC68HC912DG128 expected file size is 2048 bytes, for MC9S12DG256 file size must be 4096 bytes.
Use Megamos Crypto or Silca T6 – JMA TP08 transponder.
Module also shows PIN code and transponder have to be matched with car.
Vehicles equipped with this unit:
Alfa Romeo: 147, GT
Fiat: Stilo(1999-2007), Palio(1999-), Idea
Lancia: Thesis, Ypsilon
Maserati: Quattroporte, Granturismo

  • Software module 9 – Fiat, Lancia IMM100.01 immobox Marelli

Memory device is Motorola MCU MC68HC908AZ32 QFP64 package.
Expected file size is 512 bytes.
Use Megamos Crypto or Silca T6 – JMA TP08 transponder.
Module also shows PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Lancia: Lybra
Fiat: Multipla

  • Software module 45 – Fiat, Lancia, Citroen, Peugeot vans, Iveco vans/trucks CODE2 with BSI Marelli type 2 

Memory device is serial eeprom 95c160 or 95c320, both SSOP8 package. For 95c160 expected file size is 2048 bytes, for 95c320 is 4096 bytes.
Use Megamos Crypto or Silca T6 – JMA TP08 transponder.
Module also shows PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Bravo(2007-), Ducato(2006-), Stilo(2007-), Punto(2007-)
Citroen: Jumper(2006-), Relay(2006-)
Peugeot: Boxer(2006-)
Lancia: Ypsilon(2007-)
Iveco: Daily(2007-), Eurocargo(2007-)

  • Software module 48 – Fiat New Panda BSI Siemens VDO

Memory device is Motorola MCU MC9S12DG128 QFP 112 package.
Expected file size is 2048 bytes.
You can read and write Motorola with TMPro, download connection diagram.
Use PCF7936 or Silca T14 – JMA TP12 transponder.
Software also shows PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Panda(2003-)

  • Software module 59 – Fiat Grande Punto BSI Delphi Price:250 Euro

Memory device is serial eeprom 93c86 SMD8 package.
Expected file size is 2048 bytes.
Use PCF7936 or Silca T14 – JMA TP12 transponder or remote key with PCF7946.
Module also shows PIN code.
Written transponder is ready programmed to start the vehicle.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT:if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.
Vehicles equipped with this unit:
Fiat: Grande Punto, New 500, Fiorino
Alfa Romeo: Mito
Ford: KA
Citroen: Nemo
Peugeot: Beeper
Opel: Combo D

  • Software module 100 – Fiat dashboard Marelli, VDO

Memory device is serial eeprom 95c160 or 24c16 both SMD8 package.
Expected file size is 2048 bytes.
Use Megamos Crypto or Silca T6 – JMA TP08 transponder.
Module also shows PIN code.
For Marelli dashboard written transponder is ready programmed to start the vehicle.
For VDO dashboard transponder has to be matched with car using diagnostic device.
VagTacho K+CAN supports key programming for Fiat dashboards, please visit VagTacho K+CAN
Vehicles equipped with this unit:
Fiat: Palio, Siena, Strada, Uno 2010

  • Software module 112 – Fiat, Lancia, PSA BSI Marelli type 3

Memory device is serial eeprom 95c160 SSOP8 package.
Expected file size is 2048 bytes.
Use PCF7936 or Silca T14 – JMA TP12 transponder or remote key.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT:if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.
Module also shows PIN code
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat: Bravo(2007-), Ducato(2006-), Stilo(2007-), Punto(2007-), Idea(2008-)
Citroen: Jumper(2006-), Relay(2006-)
Peugeot: Boxer(2006-)
Lancia: Ypsilon(2007-), Musa(2007-)

  • Software module 118 – Alfa Romeo, Fiat key reader

Memory device is serial eeprom 24c04 SMD8 package.
Expected file size is 512 bytes.
Software shows PIN code.
Use PCF7936 or Silca T14 – JMA TP12 transponder or remote key.
Vehicles equipped with this unit:
Alfa Romeo: 159, Brera
Fiat: Croma

  • Software module 175 – Fiat Grand Siena, Palio BSI Marelli type 5 with ID46

Memory device is serial eeprom 95c160 or 95c640 SSOP8 package.
Expected file size is 2048 or 8192 bytes.
Use PCF7936 or Silca T14 – JMA TP12 transponder or remote key with PCF7946.
IMPORTANT when you want to program remote key :open key and look on PCB.
You will find 2 SMD chips – PCF7946 (SMD 14 pins) and smaller SMD chip, which can be with 8, 10, or 16 pins.
If smaller SMD chip is with 10 or 16 pins, PROGRAM KEY AS TYPE 1.
If smaller SMD chip is with 8 pins, PROGRAM KEY AS TYPE 2.
IMPORTANT:if buttons of remote operate, but not work properly, for ex. button for locking opens trunk, this is NOT A TMPro SOFTWARE PROBLEM. Use other type remote.
Module also shows PIN code.
Written transponder is ready programmed to start the vehicle.
Vehicles equipped with this unit:
Fiat:Grand Siena (2011-), Palio (2011-), Ducato(2011-), 500L(2011-)
Alfa Romeo:Giulietta(2011-)
Iveco:Daily(2011-)

  • Software module 194 – Fiat South America immobox Marelli IMM009.10

Memory device is Motorola 9S08DZ32 32-pin SMD package.
You can read Motorola with TMPro, download connection diagram.
Software shows PIN code.
Use Megamos Crypto or Silca T6 – JMA TP08 transponder.
Written transponder is ready programmed to start car.
You can watch video HERE and HERE.
Vehicles equipped with this unit:
Fiat: Fiorino Furgao, Palio 2012->, Siena 2012->, Ducato 2012->
Peugeot:Boxer 2012->
Citroen:Jumper 2012->

  • Software module 201 – Fiat BSI Continental type 1

Memory device is Motorola MPC5606B.
You can read and write Motorola MPC5606B with UPA-USB-S programmer. Download connection diagram
Expected file size is 65536 bytes.
Use HITAG 128-bit AES remote key ot PCF7939MA transponder.
Written remote key or transponder are ready programmed to start car.
REMOTE part of remote key is also programmed and work.
Vehicles equipped with this unit:
Fiat:Uno (chassis F),Mobi,Toro

  • Software module 202 – Fiat BSI Continental type 2 

Memory device is Motorola 9S12XEG384.
You can read and write Motorola 9S12XEG384 with TMPro. Download connection diagram
Expected file size is 4096 bytes.
Use HITAG 128-bit AES remote key ot PCF7939MA transponder.
Written transponder is ready programmed to start car.
Vehicles equipped with this unit:
Fiat:500X


Share this Product


More from this collection

x